Timeless Leather Holster for Cross-Draw

High quality leather, fit, finish and workmanship. I won't be buying another from you; the holster will probably outlive me.

Thank you Sir for your excellent feedback. In the case you will decide one day different design of the holster, please do not forget to use our discount code for returning customers.

5stars I would definitely buy again, premium holster

It fit my pistol perfectly after a short break in period. could not be happier.

Thank you Sir for your great feedback. We are happy that you like your holster.

Superb product, as usual.
I trimmed some width off of the thumb strap so that it would snap securely under the hammer. It needed very little fitting, just some mink oil inside and out and a night with my Astra A-100 snuggled inside in a plastic blanket. Some hand-wringing the next day to limber it up, a shot of silicone spray inside and I'm good to go. This is my 6th Falco and will probably be my last.
My 1911's and A-100's (I own three of each in .45 ACP) have happy travel homes and at 82, it's unlikely I will wear one of your fine holsters out.

Thank you for your detailed feedback that we greatly appreciate.

Exactly as i ordered perfact fit for the pistol.

Thank you Sir for your valuable feedback. Enjoy in the good health

The holster was too tight, just as I thought it would be, and it doesn't fit the gun it was purchased for, no nore purchases from Falco, I thought you would be different from other companies, but I guess not.

Thank you for your feedback. Please try to make break in on your holster as we instructed you in the email that we posted to you. The leather is natural material and sometimes it shrink in drying process. In case it will not help, please write us on the email back and we will take care of it.

It took some time to break it in but i love it its really comfortable and it conceals my firearm well really glad I purchased this holster!

Perfect holster at a fair value. I am extremely happy with my purchase.

Thank you! It is very nice to hear back from our satisfied customers.

The snap button didn't reach all the way around the slide, not allowing me to snap in my pistol. Luckily, the fit is snug enough to where I really don't need the snap button. I just cut the male and the female snap flaps off my holster making it more of a open holster.

Thank you for your review. We will contact you soon and I am sure we will solve this problem.

Bought cross-draw holster for S&W 642. Very well made and quick delivery. I have oversize wood grips on this revolver so it took a little extra effort to break in and get the thumb strap to fit.

Perfect fit, finish and material. I couldn't be more pleased. My Astra A80 (45ACP) fits like a glove right out of the box, Glad you took my suggestion and used the SIG P220 mold for the holster. I had to trim some width off of the hammer strap so that it would fit under the spur-that was not a big problem (the sig has a rounded hammer).
Your 1911 Cross Draw holster tended to activate the mag release on occasion when I bent over. I removed a dime-size section of leather over the mag release with a large leather punch-now no more problem.
I will recommend FALCO to anyone without reservation.

Thank you for your feedback that we really appreciate.

Great product!!

Thank you Sir

5 stars. Very nice cross drawn holster for my Kimber. Very tight fit so be patient with the break in process.

Thank you Dwayne, for your wonderful review!

Hi, I'm just finishing the break-in for my new holster. It does take some time and patience,
however, when done properly my pistol will fit like a glove. I have a Falco IWB holster for my full size 9mm
and after about a week of break-in it does fit like a glove. Can't say enough about the quality of leather, the stitching,
and finish. The craftmanship is the best I've ever seen. If you want a quality holster, GO FALCO!

The holster was a perfect fit for my gun. It only took a short time to break it in.
5 Stars

Falco holsters are among the very best made, and weapon specific holsters on the market. I have them for three of the duty weapons I carry, and they are the best I have ever had. Falco are the only ones that make a quality holster for the Walther Creed .9MM pistol and it is a good one.

Good holster and fantastic service. Fed X shipping was just a few days too. Yes, they shipped within ten business days on a custom holster. My only concern is that the holster seems to have been formed over a rounded trigger guard while I have more of a square or flat trigger guard; this is causing me some extra effort in working up a good fit, just a minor issue.
Yes, I will not hesitate to recommend Falco and I will order again.

Grateful holster, but needs some improvement.
The one belt loop needs to be fully connected to the holster and some leather needs to be added between the gun and your stomach, to make it more comfortable.

It did not fit the gun, I am having to stretch the inside of the holster by forcing my revolver down in the holster and leaving it in the holster for a while, it is beginning to stretch some, but not please with this at all.

Indeed, the leather holsters need break-in. In the future you can try our O202 Leather Impregnation and Break in Set.

The holster quality is amazing, but function and fit leaves a lot to be desired. If I fully insert my pistol (Taurus 92 a Beretta clone) It takes 2 man and a boy to pull it out. I wrapped it in a plastic bag as recommended, and inserted it for a week, only a tad bit looser. Wrapped it with 3 plastic bags and rubbed 4 coats of mink oil on the front side, and let it sit for another week. No way can I draw it one handed when worn on a belt. (I should mention it is a right handed cross draw) Aside from it being terribly snug, almost all of the front of the pistol grip is covered by the leather making it almost impossible to grip it for drawing. I will have to trim some of this leather away carefully, along with the back strap (much too wide and centered over the trigger rather than just behind it. I'll make it work if (I hope I can loosen it up quite a bit. Very nice quality but I doubt it was designed for my gun.

Workmanship is Excellent but the Design is Poor in my Opinion. Cant grab whole handle of Gun when pulling in out of holster .

This is the 2nd holster I purchased from Falco within the past year. The first holster was perfect. The 2nd holster was definitely a poor fit for my 9mm H&P P30. I tried stretching the leather for a period of 2 weeks. There was no improvement. The weapon just does not fit this holster. Either the dimensions used to create the holster were incorrect from H&P, or the craftmanship of the holster was poor. The weapon does not fit into the body of the holster and the thumb strap over the hammer is way too small even after the stretching. Falco offered to replace the holster. I am waiting for the replacement. I am willing to send this holster back, as soon as I receive the replacement holster, for Falco to analyze the difficulties with this holster. The photographs I sent to Falco are of good quality, but it would be better if Falco examined the holster.